How to Use

Simple, Effective Application

Application methods for maximum crop benefits.

🌿

Foliar Spray Application

Step-by-Step Instructions

  1. Mix 2–3 ml of Kelpify Kelp Seaweed Fertilizer per liter of water
  2. Stir the solution thoroughly to ensure even distribution
  3. Fill your spray equipment with the prepared solution
  4. Apply evenly on both upper and lower leaf surfaces
  5. Spray during early morning or late evening for best absorption
  6. Avoid spraying during hot midday sun or windy conditions

Pro tip: for best results, apply every 15–20 days during the growing season.

Farmer spraying crops
🌱

Drip / Irrigation Application

Drip irrigation on tomato field

Step-by-Step Instructions

  1. Calculate the total water volume in your irrigation system
  2. Add 2–3 liters of Kelpify fertilizer per 1000 liters of irrigation water
  3. Mix thoroughly in the fertilizer tank
  4. Run the irrigation system as per your normal schedule
  5. Ensure even distribution across the entire field
  6. Flush the system with clean water after application

Pro tip: ideal for large-scale farming and consistent nutrient delivery.

Recommended Growth Stages

Apply Kelpify Agri Solutions at these critical growth stages for optimal results.

Stage 01
15–20 days after planting

Early Vegetative Stage

Promotes strong root development and vigorous early growth.

Apply every 15 days

Stage 02
At flower bud formation

Flowering Stage

Enhances flower formation and reduces flower drop.

Apply 2–3 times during flowering

Stage 03
After fruit set

Fruit Development

Improves fruit size, quality, and shelf life.

Apply every 10–15 days

Pro Tips for Best Results

Maximize the effectiveness of Kelpify with these expert-recommended practices.

1. Apply during cooler hours

Spray in the early morning or late evening to prevent rapid evaporation and ensure maximum absorption by leaves and roots.

2. Start early in the season

Begin application from the early vegetative stage to build a strong foundation for root development and plant immunity.

3. Maintain consistent intervals

Apply every 15–20 days throughout the growing season for steady nutrient supply rather than infrequent heavy doses.

4. Combine with soil drenching

For best root development, combine foliar spray with soil drenching during the first month of planting.

Dosage Chart by Crop Type

Recommended application rates for different crop categories.

Crop TypeFoliar Spray (ml/L)Drip (L / 1000L water)Frequency
Vegetables2–3 ml/L2 L/1000LEvery 15 days
Fruits2–3 ml/L2–3 L/1000LEvery 15–20 days
Cereals & Grains2 ml/L2 L/1000LEvery 20 days
Flowers1.5–2 ml/L1.5 L/1000LEvery 10–15 days
Cash Crops2–3 ml/L2–3 L/1000LEvery 15–20 days

Common Mistakes to Avoid

Steer clear of these errors to get the most out of every application.

⚠️

Over-Application

Using more than the recommended dose does not improve results. Excess application wastes product and may stress the plant. Always follow the dosage chart for your crop type.

☀️

Midday Spraying

Spraying during peak sunlight hours (10 AM–3 PM) causes rapid evaporation and reduces nutrient absorption. Always spray in the early morning or late evening.

🧪

Mixing with Unknown Chemicals

Do not mix Kelpify with pesticides or other fertilizers without testing compatibility first. Consult our team for guidance.

Foliar Application

Concentration: 2–3 ml per liter of water

Coverage: 200–300 liters per acre

Frequency: Every 15–20 days

Drip Irrigation

Concentration: 2–3 liters per 1000 liters

Application: Through fertigation system

Frequency: Every 15–20 days

Safety & Storage

Safety Precautions

  • Wear protective gloves during handling
  • Avoid contact with eyes and skin
  • Keep out of reach of children
  • Do not mix with other chemicals

Storage Instructions

  • Store in a cool, dry place
  • Keep away from direct sunlight
  • Ensure container is tightly sealed
  • Use within 2 years of manufacture